DENVER WCM-8010

Product information

• Digital wildlife camera with 8mp CMOS
• Built-in 2.0” LCD screen
• 8mp cmos image sensor (5/8/12MP image res.)
• 2G/GSM Simcard reader - insert simcard & receive pictures via MMS and/or Email
• 3 motion sensors
• Full automatic ir filter for use in the dark - 42 leds
• Lens: F=3.09; F/NO=2.0; FOV 90°
• Pir sensing distance: 1-25 meters
• Trigger speed 0,3 second
• Standby time: up to 3 months
• MicroSD card slot for rec. - up to 32gb (card not included)
• Video resolution: 1080p,
• 720p, vga (up to 1440x1080)
• Waterproof: ip65 standard

You can download MMSCONFIG program here: 
MMSCONFIG

You can find a guide on how to setup your camera here:

GUIDE

Update (please pay attention to your PO/Serial number. You need to use the correct one for your camera)

Update for PO11803, 11981, 12058 & 12118, PO12176, PO12209 & PO12636

1. Download and unzip the update file
2. Copy "FW900.bin" to an empty MicroSD card and insert this into the camera
3. Power on the camera in TEST mode and wait.. (there is a red LED diode on front that blinks, but pay attention to the screen inside. When this turns on again, the camera is updated. 
4. Turn off the camera, take out the MicroSD card and make sure to delete the update file before using it again. 

Please notice: MMS setup etc. has to be made again as the camera will be reset completely. 

Please download update here:

WCM-8010 -  PO11803, 11981, 12058 & 12118, PO12176, PO12209 & PO12636

Update for PO12844

We have an update ready because we have seen some units with noisy pictures taken at night. Especially if you take more than one picture. So if you have this issue, please try this firmware.  

1. Download and unzip the update file
2. Copy "FW900.bin" to an empty MicroSD card and insert this into the camera
3. Power on the camera in TEST mode and wait.. (there is a red LED diode on front that blinks, but pay attention to the screen inside. When this turns on again, the camera is updated. 
4. Turn off the camera, take out the MicroSD card and make sure to delete the update file before using it again. 

Please notice: MMS setup etc. has to be made again as the camera will be reset completely. 

Please download update here:

WCM-8010 - PO12844

Update for PO13174

We have an update ready because we have seen some units with noisy pictures taken at night. Especially if you take more than one picture. So if you have this issue, please try this firmware.  

1. Download and unzip the update file
2. Copy "FW900.bin" to an empty MicroSD card and insert this into the camera
3. Power on the camera in TEST mode and wait.. (there is a red LED diode on front that blinks, but pay attention to the screen inside. When this turns on again, the camera is updated. 
4. Turn off the camera, take out the MicroSD card and make sure to delete the update file before using it again. 

Please notice: MMS setup etc. has to be made again as the camera will be reset completely. 

Please download update here:
LINK <----